Service Manual

• relay — allows you to configure the addition of option 82 in DHCP client
packets.
• retry-count — allows you to configure the number of retries for downloading
the Dell Networking OS image and configuration file.
• vendor-class-identifier — allows you to configure the optional vendor class
identifier for DHCP option 60.
show reload-type
Displays the reload type currently configured on the system.
S4810, S4820T, S3048–ON, S5000, S6000, S6000–ON, Z9500, and MXL
Syntax
show reload-type
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0) Introduced on the S5000.
9.5(0.1) Introduced on the Z9500.
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the MXL switch. Updated the parameters for
S4810, S4820T, and Z9000.
9.1.0.0 Updated the parameters for S4810 and Z9000.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 Introduced on the Z9000.
8.3.10.0 Introduced on the S4810.
Usage Information
To check the currently configured Auto-Configuration mode (BMP or Normal
reload) on a switch running BMP, use the show reload-type command.
50
Bare Metal Provisioning CLI