Service Manual

• If you do not provide the username, the system uses current session username.

If the script is triggered from the console, the system uses the Dell Networking

OS default username (smartuser).

script get

Copy a script to a switch.

S4810, S4820T, S3048–ON, S5000, S6000, S6000–ON, Z9500, and MXL

Syntax

script get url

Parameters

url

Enter the keyword url then the URL location of the script

to download to a switch.

Defaults none

Command Modes EXEC

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0P2) Introduced on the S3048–ON.

9.7(0.0) Introduced on the S6000–ON.

9.6(0.0) Introduced on the S5000.

9.5(0.1) Introduced on the Z9500.

9.3(0.0) Introduced on the S6000.

9.2(0.0) Introduced on the S4810, S4820T, Z9000, and MXL Switch.

Usage Information

The following formats are supported: Flash, FTP, TFTP, HTTP, and SCP. To retrieve

the script files, use the following formats:

• Flash: Copy from the flash file system (flash://filepath)

• FTP: Copy from the remote file system using FTP (ftp://

userid:password@hostip/filepath)

• HTTP: Copy from the remote file system using HTTP (http://hostip/

filepath)

• SCP: Copy from the remote file system using SCP (scp://

userid:password@hostip/filepath

)

• FTP: Copy from the remote file system using FTP (tftp://hostip//

filepath

)

Smart Scripting CLI