Owner's Manual

Bare Metal Provisioning (BMP) - CLI | 47
reload conditional nvram-cfg-change
z
, MXL
Switch
To perform a reload on the chassis to upgrade any configuration changes that have
changed the NVRAM content, after saving the BMP configuration, use this
command.
Syntax
reload conditional nvram-cfg-change
Defaults
None.
Command Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
Usage
Information
To upgrade any NVRAM changes to the chassis caused by the following CLI
commands:
stack-unit {unit} stack-group, stack-unit {unit} port {fanout-portid}
portmode quad, asf-mode, cam-acl, buffer-profile, use the reload conditional
nvram-cfg-change command on a switch running BMP.
reload-type
z
, MXL
Switch
Configure a switch to reload in Normal mode or as a DHCP client with all ports
configured for Layer 3 traffic.
Syntax
reload-type {normal-reload | bmp [ {enable | disable}] [config-scr-download
{enable | disable}] [dhcp-timeout minutes] [retry-count number]
[vendor-class-identifier description]}
To stop the BMP process, use the stop bmp command.
Parameters
Version 9.5(0.1) Introduced on the Z9500.
Version 9.3(0.0) Introduced on the S6000.
Version 9.2(0.0) Introduced on the MXL Switch.
Version 9.1(0.0) Introduced on the Z9000 and S4810.
Version 8.3.19.0 Introduced on the S4820T.
normal-reload Enable the normal reload type and disable BMP reload type. After
performing the reload, the system retrieves the Dell Networking OS
image and startup-configuration files from the flash after performing
a reload.
bmp (Default) Enable the BMP reload type. The system acts as a DHCP
client and downloads the Dell Networking OS image and
configuration file or script files from a specified DHCP server.