Owner's Manual

8 | About this Guide
www.dell.com | support.dell.com
• S4820T switches require Dell Networking OS version 9.2(0.0) or later.
• Z9000 switches require Dell Networking OS version 9.0.0.0 or later.
(SmartScripts and SmartUtil support only)
• S6000 switches require Dell Networking OS version 9.0.2.0 or later.
• MXL Switches require Dell Networking OS version 9.2(0.0) or later.
• Z9500 switches require Dell Networking OS version 9.5(0.1) or later. (Bare
Metal Provisioning, SmartScripts and REST API only)
Conventions
This document uses the following conventions to describe command syntax:
Information Symbols
Table 1-1 describes the symbols used in this document.
Convention Description
keyword Keywords are shown in bold and should be entered in the CLI as listed.
parameter Parameters are shown in italics and require a number or word to be entered in the CLI.
{X} Keywords and parameters within braces are required entries and must be entered in the CLI.
[X] Keywords and parameters within brackets are optional.
x | y Keywords and parameters separated by bar require you to choose one.
Table 1-1. Information Symbols
Symbol Type Description
Note Informs you about important operational information.
Dell Networking OS
Behavior
Informs you about an Dell Networking OS behavior. These behaviors are
inherent to the Dell Networking system or Dell Networking OS feature and are
non-configurable.
Z9000
Z9500
MXL Switch
Platform-specific
Feature
Informs you of the platform supporting the Open Automation features.
For example, the S4810 and S4820T platforms support all Open Automation
features. The Z9000, Z9500, and S6000 platform supports the SmartScripts and
SmartUtil features. The MXL platform supports Representational State Transfer
Interface (REST API) and the SmartScripts features.
Exception A note associated with some other text on the page that is marked with an
asterisk.