Owner's Manual

Smart Scripting CLI | 85
package install
,
Z9000, Z9500,
MXL Switch
Install the Smart Scripting package. This command downloads the package from the
specified location and installs it in the internal flash memory on a switch.
Syntax
package install location
Parameters
Defaults
None
Command Modes
EXEC Privilege
Command
History
Usage
Information
Because installing an Open Automation package may take time, the installation is
performed in the background when the download finishes. A message displays on the
console when the installation is complete.
To follow the progress of a package installation, use the show packages command.
package uninstall
,
Z9000, Z9500,
MXL Switch
Remove an installed Open Automation package, such as Smart Scripting, from the
system.
Syntax
package uninstall package-name
Parameters
location Enter the location from where you will download and install an Open Automation
package, where location is one of the following values:
• From the local flash: flash://filename
• From an FTP server: ftp://userid:password@host-ipaddress/filepath
• From a TFTP server: tftp://host-ipaddress/filepath
• From a NFS mount server: nfsmount://filepath
Version 9.5(0.1) Introduced on the Z9500.
Version 9.2(0.0) Introduced on the MXL switch.
Version 9.0.2.0. Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.8.0 Introduced on the S4810.
package-name Enter the name of an Open Automation automation package, exactly
as it appears in the show packages list.