Owner's Manual

Smart Scripting CLI | 97
Example
“link down”
pattern in log
messages
Dell(conf)# script trigger-event ma_event log-event tag "Admin state to down: Ma"
Example
“failure” pattern
in log messages
Dell(conf)# script trigger-event fail_event log-event tag “failure”
Example
severity 1 log
messages
Dell(conf)# script trigger-event severity1_event log-event severity 1
Example
85% memory
consumption
Dell(conf)# script trigger-event memory_event mem-usage 85
show packages
,
Z9000, Z9500,
MXL Switch
Display the installed Open Automation packages, including version number and
contents.
Syntax
show packages [system]
Parameters
Defaults
None
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
In a stack setup, Dell Networking OS automatically synchronizes the software
version installed on the master stack unit with the other switches in the stack. To view
the installed software versions on the stack units, use the
show packages system
command.
system (Optional) Enter the keyword brief to display system information
about the package, version, and status of the package in all
stack-units.
Note: This option is only available on switches that allow
stacking.
Version 9.5(0.1) Introduced on the Z9500.
Version 9.2(0.0) Introduced on the MXL Switch.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.8.0 Introduced on the S4810.