Service Manual
Table Of Contents
- Dell Networking Open Automation Guide December 2015
- About this Guide
- Open Automation Framework
- Bare Metal Provisioning
- Introduction
- How it Works
- Prerequisites
- Industrial Standard Upgrades with BMP
- BMP Process Overview
- BMP Operations
- Configure BMP
- BMP Commands and Examples
- System Boot and Set-Up Behavior in BMP Mode
- BMP Mode: Boot and Set-UP Behavior
- DHCP Offer Vendor-Specific Option for BMP
- DHCP Offer Relay Option 82
- Software Upgrade Using BMP
- Apply Configurations Using BMP Scripts
- Using the Post-Configuration Script
- Using Auto-Execution Script (Normal Mode Only)
- Timers in Pre–configuration and Post–configuration Scripts
- Script Examples
- BMP Operations on Servers Overview
- File Server Settings
- Domain Name Server Settings
- BMP MIB Support
- Bare Metal Provisioning CLI
- Open Management Infrastructure
- Puppet
- Smart Scripting
- Overview
- Download the Smart Scripting Package
- Dell Proprietary Utilities
- Dell SmartScript Utilities
- SQLite
- NET SNMP Client
- Limits on System Usage
- Supported UNIX Utilities
- Creating a User Name and Password for Smart Scripting
- Logging in to a NetBSD UNIX Shell
- Downloading Scripts to a Switch
- Setting a Search Path for Scripts
- Scheduling and Executing Scripts
- Running a Script from the UNIX Shell
- Running Scripts with User Privileges
- Smart Scripting CLI
- disable
- execute
- mount nfs
- package install
- package uninstall
- script (run)
- script (stop/resume/clear/kill/unschedule)
- script event-handler
- script execute (EXEC mode)
- script execute (CONFIGURATION mode)
- script get
- script path
- script remove
- script trigger-event
- show packages
- show script
- start shell
- triggered-by
- switch script limit
- username (event handler)
- username
- Virtual Server Networking
- Virtual Server Networking CLI
- REST API
- HTTP and HTTPS
- XML
- Important Points to Remember
- REST Authentication
- Request Query Parameters
- Sample BGP Configurations
- HTTP Status Error Codes
- REST API — Protocol Data Unit (PDU) Structure
- Configurations
- Operational
- Operational Data for IPv6
- Management Information Base (MIB)
- IETF Interface Operations
- REST API Framework to Execute the CLIs
- Samples of the config-command
- Samples of the EXEC command
- Samples of the show-command
- REST API CLI
- Web Server with HTTP Support
Dell
Networking
Platform
Minimum Operating Software
MXL 9.2(0.0) or later
Z9500 9.5(0.1) or later
(BMP, SmartScripts, and REST API only)
Z9100–ON 9.8.1.0 or later
Conventions
To describe command syntax, this document uses the following conventions.
Convention Description
keyword Keywords are shown in a terminal font and are entered in the CLI as listed.
parameter Parameters are shown in italics and require you enter a number or word in the CLI.
{X} Keywords and parameters within braces require entries in the CLI.
[X] Keywords and parameters within brackets are optional.
x | y Keywords and parameters separated by bar require that you to choose one.
Related Documents
For more information about Dell Networking switches described in this document, refer to the following
documents.
Dell
Networking
Platform
Related Documents
S4810
• Dell Networking OS Command Line Reference guide for the S4810 System
• Dell Networking OS Configuration Guide for the S4810 System
• Installing the S4810 System
S4820T
• Dell Networking OS Command Line Reference guide for the S4820T System
• Dell Networking OS Configuration Guide for the S4820T System
• Installing the S4820T System
S4048–ON
• Dell Networking OS Command Line Reference guide for the S4048–ON
System
• Dell Networking OS Configuration Guide for the S4048–ON System
• Installing the S4048–ON System
10
About this Guide