Service Manual
Table Of Contents
- Dell Networking Open Automation Guide December 2015
- About this Guide
- Open Automation Framework
- Bare Metal Provisioning
- Introduction
- How it Works
- Prerequisites
- Industrial Standard Upgrades with BMP
- BMP Process Overview
- BMP Operations
- Configure BMP
- BMP Commands and Examples
- System Boot and Set-Up Behavior in BMP Mode
- BMP Mode: Boot and Set-UP Behavior
- DHCP Offer Vendor-Specific Option for BMP
- DHCP Offer Relay Option 82
- Software Upgrade Using BMP
- Apply Configurations Using BMP Scripts
- Using the Post-Configuration Script
- Using Auto-Execution Script (Normal Mode Only)
- Timers in Pre–configuration and Post–configuration Scripts
- Script Examples
- BMP Operations on Servers Overview
- File Server Settings
- Domain Name Server Settings
- BMP MIB Support
- Bare Metal Provisioning CLI
- Open Management Infrastructure
- Puppet
- Smart Scripting
- Overview
- Download the Smart Scripting Package
- Dell Proprietary Utilities
- Dell SmartScript Utilities
- SQLite
- NET SNMP Client
- Limits on System Usage
- Supported UNIX Utilities
- Creating a User Name and Password for Smart Scripting
- Logging in to a NetBSD UNIX Shell
- Downloading Scripts to a Switch
- Setting a Search Path for Scripts
- Scheduling and Executing Scripts
- Running a Script from the UNIX Shell
- Running Scripts with User Privileges
- Smart Scripting CLI
- disable
- execute
- mount nfs
- package install
- package uninstall
- script (run)
- script (stop/resume/clear/kill/unschedule)
- script event-handler
- script execute (EXEC mode)
- script execute (CONFIGURATION mode)
- script get
- script path
- script remove
- script trigger-event
- show packages
- show script
- start shell
- triggered-by
- switch script limit
- username (event handler)
- username
- Virtual Server Networking
- Virtual Server Networking CLI
- REST API
- HTTP and HTTPS
- XML
- Important Points to Remember
- REST Authentication
- Request Query Parameters
- Sample BGP Configurations
- HTTP Status Error Codes
- REST API — Protocol Data Unit (PDU) Structure
- Configurations
- Operational
- Operational Data for IPv6
- Management Information Base (MIB)
- IETF Interface Operations
- REST API Framework to Execute the CLIs
- Samples of the config-command
- Samples of the EXEC command
- Samples of the show-command
- REST API CLI
- Web Server with HTTP Support
IF MIB Model
+--ro mib
+--ro if-mib
+--ro ifNumber? int32
+--ro ifTable* [ifIndex]
+--ro ifIndex mib:InterfaceIndex
+--ro ifDescr? smiv2:DisplayString
+--ro ifType? ianaiftype-mib:IANAifType
+--ro ifMtu? int32
+--ro ifSpeed? yang:gauge32
+--ro ifPhysAddress? yang:phys-address
+--ro ifAdminStatus? enumeration
+--ro ifOperStatus? enumeration
+--ro ifLastChange? yang:timeticks
+--ro ifInOctets? yang:counter32
+--ro ifInUcastPkts? yang:counter32
x--ro ifInNUcastPkts? yang:counter32
+--ro ifInDiscards? yang:counter32
+--ro ifInErrors? yang:counter32
+--ro ifInUnknownProtos? yang:counter32
+--ro ifOutOctets? yang:counter32
+--ro ifOutUcastPkts? yang:counter32
x--ro ifOutNUcastPkts? yang:counter32
+--ro ifOutDiscards? yang:counter32
+--ro ifOutErrors? yang:counter32
x--ro ifOutQLen? yang:gauge32
x--ro ifSpecific? yang:object-identifier
+--ro ifName? smiv2:DisplayString
+--ro ifInMulticastPkts? yang:counter32
+--ro ifInBroadcastPkts? yang:counter32
+--ro ifOutMulticastPkts? yang:counter32
+--ro ifOutBroadcastPkts? yang:counter32
+--ro ifHCInOctets? yang:counter64
+--ro ifHCInUcastPkts? yang:counter64
+--ro ifHCInMulticastPkts? yang:counter64
+--ro ifHCInBroadcastPkts? yang:counter64
+--ro ifHCOutOctets? yang:counter64
+--ro ifHCOutUcastPkts? yang:counter64
+--ro ifHCOutMulticastPkts? yang:counter64
+--ro ifHCOutBroadcastPkts? yang:counter64
+--ro ifLinkUpDownTrapEnable? enumeration
+--ro ifHighSpeed? yang:gauge32
+--ro ifPromiscuousMode? smiv2:TruthValue
+--ro ifConnectorPresent? smiv2:TruthValue
+--ro ifAlias? smiv2:DisplayString
+--ro ifCounterDiscontinuityTime? yang:timestamp
x--ro ifTestId? smiv2:TestAndIncr
x--ro ifTestStatus? enumeration
x--ro ifTestType? smiv2:AutonomousType
x--ro ifTestResult? enumeration
x--ro ifTestCode? yang:object-identifier
x--ro ifTestOwner? mib:OwnerString
+--ro ifStackTable* [ifStackHigherLayer ifStackLowerLayer]
| +--ro ifStackHigherLayer mib:InterfaceIndexOrZero
| +--ro ifStackLowerLayer mib:InterfaceIndexOrZero
| +--ro ifStackStatus? smiv2:RowStatus
+--ro ifRcvAddressTable* [ifIndex ifRcvAddressAddress]
| +--ro ifIndex leafref
| +--ro ifRcvAddressAddress yang:phys-address
| +--ro ifRcvAddressStatus? smiv2:RowStatus
| +--ro ifRcvAddressType? enumeration
REST API
189