Owner's Manual

Bare Metal Provisioning 1.5 | 31
Reload with a DHCP Server offer without a Configuration File
If a switch that is configured to reload in DHCP-Client mode reaches a DHCP server
but cannot retrieve a configuration file, the switch looks for a configuration file on the
file server only if the honor startup-config option was not entered with the reload
factory-default dhcp-client-mode command.
1. The system boots up with the BMP application.
Entering Jumpstart app:
Initializing runtime directories
Reading Release Image at 0x40000 Part: A
2. The system receives a DHCP offer from a DHCP server with the following
parameters.
***** DHCP OFFER DETAILS *****
DHCP acquired IP = 20.0.0.77
subnet-mask = 255.255.255.0
DHCP provided Image file = FTOS-SC-1-2-0-385.bin
DHCP provided Config file = NIL
DHCP Server IP = 20.0.0.1
TFTP Server IP = 20.0.0.1
DNS IP = 20.0.0.1
**********************************
3. The system downloads the image from the file server.
get FTOS-SC-8.3.3.4.bin/server/home/image/FTOS-S60_BM
tftp> Received 21752859 bytes in 17.0 seconds
4. The system compares the current local image to the downloaded image as follows:
a If the image versions are same the system loads the FTOS image from the
local flash, and does not upgrade with the downloaded image.
DOWNLOADED RELEASE HEADER :
Release Image Major Version : 1
Release Image Minor Version : 2
Release Image Main Version : 0
Release Image Patch Version : 385
FLASH RELEASE HEADER :
Release Image Major Version : 1
Release Image Minor Version : 2
Release Image Main Version : 0
Release Image Patch Version : 385
The image found in tftp is same