Service Manual
triggered-by
Allows you to associate the events to a script in Event Handler Conguration mode.
S4810, S4820T, S3048–ON, S3100 Series, S4048–ON,
S5000, S6000, S6000–ON, Z9100–ON, Z9500, C9010, and
MXL
Syntax
triggered—by trigger-name
Parameters
trigger-name
Enter the name of the script event to trigger.
Defaults none
Command Modes SCRIPT EVENT HANDLER CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S3100 Series.
9.9(0.0) Introduced on the C9010.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500, and MXL.
switch script limit
To control the script that is running based on CPU, memory, or disk IO usage, use the switch script limit.
S4810, S4820T, S3048–ON, S3100 Series, S4048–ON,
S5000, S6000, S6000–ON, Z9100–ON, Z9500, C9010, and
MXL
Syntax
switch script limit {cpu percentage mem percentage disk percentage}
To return to the default value, use the no switch script limit command.
Parameters
cpu percentage
Enter the keyword cpu and the maximum percentage limit for the script execution. The
range is from 20 to 90 percent.
106 Smart Scripting CLI