Service Manual

virtualswitch-
name
Display information on a specied virtual switch by entering the name the Hypervisor
generates.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the S5000.
9.2(0.0) Introduced on the MXL switch.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Usage Information
To display the interface, virtual-switch name, and Hypervisor-session name for all current Hypervisor connections
on the switch, use the show virtualswitch command.
To display detailed information about a Hypervisor session, re-enter the command with the interface and virtual-
switch name for the session from the show virtualswitch output as shown in the following example.
Example
The following command output displays information on the Hypervisor sessions established on all virtual switches
on network servers connected to switch interfaces.
Dell#show virtualswitch
Interface VSwitch Hypervisor
Gi 0/32 vSwitch3 VMWare_vmware207
Po 7 vSwitch1 VMWare_vmware206
The following command output displays information on the Hypervisor session established on virtual switch
vSwitch3 on a VMware server connected to the interface 0/32.
Dell#show virtualswitch Gigabitethernet 0/32 vSwitch3
Interface :Gi 0/32
Hypervisor Type :vmware
Hypervisor Name :vmware207
Hypervisor Version :4.1.0
Virtual Switch :vSwitch3
Port groups :
Name :VLAN 3
Vlan Id :138
VIFs:
MAC MTU
00:50:56:92:00:77 8000
Name :VM Network 4
Vlan Id :-
VIFs:
MAC MTU
00:0c:29:4f:66:19 8000
PIFs:
MAC MTU
00:26:55:dd:01:4f 8000
NOTE
: In the show virtualswitch output, VLAN 1 displays as VLAN ID 1; VLAN 4095 displays
without a VLAN ID as "-".
126 Virtual Server Networking CLI