Service Manual

show vmmap
Displays the virtual machines accessed on a switch interface.
S4810, S4820T, S5000, and MXL Switch
Syntax
show vmmap interface
Parameters
interface
Display information on the Hypervisor session established on a specied interface. Enter
one of the following interface types:
• For a 100/1000 Ethernet interface or 1-Gigabit Ethernet interface, enter
GigabitEthernet slot/port.
• For a 10-Gigabit Ethernet interface, enter TenGigabitEthernet slot/port.
•
For a port-channel interface, enter port-channel number. Valid port-channel
numbers are from 1 to 128.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the S5000.
9.2(0.0) Introduced on the MXL switch.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Usage Information
The show vmmap command displays information on the virtual machines accessed on a switch interface, including
the virtual machine name, VMAC address, and corresponding VLAN ID.
Example
Dell#show vmmap gigabitethernet 0/32
VM Name VIF Vlan ID
Redhat_207_03_nfs 00:0c:29:4f:66:19 -
Redhat_207_03_nfs 00:50:56:92:00:77 138
NOTE: In the show vmmap output, VLAN 1 displays as VLAN ID 1; VLAN 4095 displays without a
VLAN ID as "- ".
Related Commands hypervisor — denes a Hypervisor instance.
Virtual Server Networking CLI 127