Service Manual

| +--ro network-prefix inet:ip-address
| +--ro network-prefix-len inet-address:InetAddressPrefixLength
| +--ro next-hop-address inet:ip-address
| +--ro seq-num uint32
| +--ro metric? uint32
| +--ro local-pref? uint32
| +--ro weight? uint32
| +--ro next-hop-cost-index? uint32
| +--ro as-path-string? string
| +--ro path-source? enumeration
| +--ro origin-code? enumeration
| +--ro is-nlre-loc-aggtd? snmpv2-tc:TruthValue
| +--ro is-stale? snmpv2-tc:TruthValue
| +--ro status-code? enumeration
| +--ro best-route? snmpv2-tc:TruthValue
| +--ro link-bandwidth? string
+--ro received-routes
+--ro prefix-list* [network-prefix network-prefix-len next-hop-address seq-
num]
+--ro network-prefix inet:ip-address
+--ro network-prefix-len inet-address:InetAddressPrefixLength
+--ro next-hop-address inet:ip-address
+--ro seq-num uint32
+--ro metric? uint32
+--ro local-pref? uint32
+--ro weight? uint32
+--ro next-hop-cost-index? uint32
+--ro as-path-string? string
+--ro path-source? enumeration
+--ro origin-code? enumeration
+--ro is-nlre-loc-aggtd? snmpv2-tc:TruthValue
+--ro is-stale? snmpv2-tc:TruthValue
+--ro status-code? enumeration
+--ro best-route? snmpv2-tc:TruthValue
+--ro link-bandwidth? string
BGPv6
Use the following denition to get the BGPv6 operational data:
Module:
BGPv6
URI:
/api/operational/dell/stats/ip/bgpv6
Methods Supported: GET
BGPv6 Operational Model
+--rw dell
+--ro stats
+--ro ip
+--ro bgpv6
+--ro neighbors [neighbor-address vrf-id]
| +--ro neighbor-address dell:ipv6-address-with-prefix
| +--ro vrf-id uint32
| +--ro remote-link? enumeration
| +--ro router-id? dell:ipv6-address-with-prefix
| +--ro state? enumeration
| +--ro state-duration? hour-minute-second
| +--ro last-read? hour-minute-second
| +--ro last-write? hour-minute-second
| +--ro hold-time? uint32
| +--ro keep-alive-interval? uint32
| +--ro stale-path-time? uint32
| +--ro config-hold-time? uint32
| +--ro config-keep-alive-interval? uint32
156
REST API