Service Manual

REST API CLI

The REST API CLI commands are supported on the S4810, S4820T, S3048–ON, S4048–ON, S6000, S6000–ON, Z9100–ON, C9010,

S5000, and Z9500 platforms.

Topics:

• rest-server

• crypto cert generate

• crypto cert install

• show crypto cert

• show ip rest-server

rest-server

Enables the REST API service over a non-secure or secure HTTP.

S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,

S6000–ON, Z9100–ON, C9010, and Z9500

Syntax

rest-server {http | secure-http}

To disable the REST API over a non-secure or secure HTTP request, use the no rest-server {http |

secure-http} command.

Parameters

http

Enable the REST API on HTTP (Port: 8008).

secure-http

Enable the REST API on HTTPS (Port: 8888).

Defaults REST API is disabled by default.

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.10(0.0) Introduced on the C9010.

9.8(1.0P1) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048–ON.

9.8(0.0P2) Introduced on the S3048–ON.

9.7(0.0) Introduced on the S6000–ON.

REST API CLI 185