Service Manual

show ip rest-server
Displays the status of the congured rest-server (HTTP or Secure HTTP).
S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9100–ON, C9010, and Z9500
Syntax
show ip rest-server
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the C9010.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, Z9000, and Z9500.
Example of the rest
service enabled over
a non — secure
HTTP
Dell#show ip rest-server
REST server status : enabled
REST server protocol : HTTP
REST server port : 8008
Dell#
Example of the rest
service enabled over
a secure HTTP
Dell#show ip rest-server
REST server status : enabled
REST server protocol : HTTPS
REST server port : 8888
Dell#
REST API CLI 189