Service Manual

Web Server

You download web server with HTTP[S] support with the SmartScripts package. It is supported on the S4810, S4820T, S3048–ON,

S4048–ON, S5000, S6000, S6000–ON, Z9100–ON, Z9500, and MXL platforms.

For more information, see Download the Smart Scripting Package.

Starting the Web Server

In the Open Automation package, the web server runs on a switch and handles HTTP and HTTPS requests. You can start the web server

in a non-secure (HTTP) or secure (HTTPS) mode.

To start the web server in a non-secure (without SSL) mode for receiving HTTP requests and write the conguration to the running

conguration, use the http-server http command.

To start the web server in a secure mode for receiving HTTPS requests and write the conguration to the running conguration, use the

http-server secure-http command.

• Starts the web-server application in non-secure mode to receive HTTP requests.

CONFIGURATION mode

http-server http

• Starts the web-server application in secure mode using SSL to receive HTTPS requests.

CONFIGURATION mode

http-server secure-http

To stop the web server and remove the conguration from the running-conguration le, use the no http-server {http |

secure-http}

command.

190 Web Server