Service Manual

00:02:56: %STKUNIT0-M:CP %BMP-5-BMP_RELEASE_HEADER_INFO:
Flash A Image Minor Version : 3
00:02:56: %STKUNIT0-M:CP %BMP-5-BMP_RELEASE_HEADER_INFO:
Flash A Image Main Version : 0
00:02:56: %STKUNIT0-M:CP %BMP-5-BMP_RELEASE_HEADER_INFO:
Flash A Image Patch Version : 57
00:02:56: %STKUNIT0-M:CP %BMP-2-BMP_DOWNLOAD_START: The Dell
Networking OS image download has started.
00:03:29: %STKUNIT0-M:CP %BMP-5-BMP_DOWNLOAD: The Dell
Networking OS image download is successful.
00:03:31: %STKUNIT0-M:CP %BMP-5-BMP_MD5_VALIDATE_SUCCESS: The
Dell Networking OS image MD5 Checksum Validation Successful.
Erasing Sseries Primary Image, please wait
• If the versions match, the system downloads the conguration le or pre–conguration script.
00:03:07: %STKUNIT0-M:CP %BMP-2-BMP_DOWNLOAD_START: The config
file download has started.
00:03:19: %STKUNIT0-M:CP %BMP-5-BMP_DWNLD_FILE_IS_SCRIPT_FILE:
The downloaded file is a script file.
00:03:19: %STKUNIT0-M:CP
%BMP-5-BMP_DWNLD_CONFIG_SCRIPT_SUCCESS: The config/script file
download is successful.
00:03:21: %STKUNIT0-M:CP %BMP-5-BMP_PRE_CONFIG_SCRIPT_BEGIN:
The Pre-Config Script has started to Execute.
..
00:04:30: %STKUNIT0-M:CP %BMP-5-BMP_PRE_CONFIG_SCRIPT_END:
Pre-Config script completed with return status 0.
c If you download the conguration le or pre–conguration script from the server, the ash ignores any saved startup
conguration. If you do not download the conguration le or pre–conguration script from the server, the startup conguration
le on the ash loads in Normal reload.
8 When the Dell Networking OS build image and conguration le or pre–conguration script download, the IP address is released.
NOTE
: In the pre–conguration script, the DHCP IP address is released after the script
executes.
9 The system applies the conguration. The system is now up and running and you can manage it as usual.
10 SHA256/MD5 hash veries the integrity of the les BMP downloads. For each le, the relevant filename.sha256 or
filename.md5 must be present in the same location as the Dell Networking OS image – script or conguration le.
a When you disable FCoE initialization protocol (FIPs) mode:
• If both filename.sha256 and filename.md5 are not present, the image is downloaded without validation.
• If both filename.sha256 and filename.md5 are present, SHA256 validation has a higher priority compared with MD5
validation.
• If filename.sha256 or filename.md5 alone is present, the corresponding type of validation is completed.
b When you enable FIPs mode:
• MD5 validation is not used. BMP checks only for the filename.sha256 and not filename.md5.
• If filename.sha256 is present, it uses SHA256 validation or the image downloads without SHA256 validation.
• Syslog for SHA256VALIDATION success on downloading an image le and conguration/pre-script le:
00:03:07: %STKUNIT0-M:CP %BMP-5-BMP_SHA256_VALIDATE_SUCCESS: The Dell
Networking OS image SHA256 Checksum Validation Succeeded.
00:01:15: %STKUNIT0-M:CP %BMP-5-BMP_SHA256_VALIDATE_SUCCESS: The
Config/Script SHA256 Checksum Validation Succeeded.
• Syslog for SHA256VALIDATION failure on downloading an image le and conguration/pre-script le:
00:03:22: %STKUNIT0-M:CP %BMP-2-BMP_SHA256_VALIDATE_FAILURE: The Dell
Networking OS image SHA256 Checksum Validation Failed.
00:03:22: %STKUNIT0-M:CP %BMP-2-BMP_SHA256_VALIDATE_FAILURE: The
Config/Script SHA256 Checksum Validation Failed.
20
Bare Metal Provisioning