Service Manual

Related Commands
• reload-type — allows you to congure the reload-type options in reload-type sub command mode.
• show reload-type — displays the current Reload mode (BMP mode or Normal mode).
script post-cong
To run the post-conguration script after the pre–conguration script is executed during the BMP reload, ensure that this command is
present in the startup–conguration.
S4810, S4820T, S3048–ON, S3100 series, S4048–ON, S5000,
S6000, S6000–ON, Z9100–ON, Z9500, C9010, and MXL
Syntax
script post-config {script-name}
Parameters
scriptname
Enter the name of the script to run after the BMP start–up conguration is applied.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform–specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0) Introduced on the S5000.
9.5(0.1) Introduced on the Z9500.
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the MXL switch and S4820T.
9.1(0.0) Introduced on the Z9000 and S4810.
Bare Metal Provisioning CLI 45