Service Manual

Version Description
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500, and MXL.
mount nfs
Share the network le system the local Dell Networking OS le system uses.
S4810, S4820T, S3048–ON, S3100 Series, S4048–ON,
S5000, S6000, S6000–ON, Z9100–ON, Z9500, C9010, and
MXL
Syntax
mount nfs nfs-server-ip: remote_dir mount_name [username username password
password]
To unmount the network le system, use the no mount command.
Parameters
remote_dir
mount_name
Enter the directory path where the network le system mounts.
username
username
(Optional) Enter the keyword username then a text string up to 40 characters long as
the user name.
password
password
(Optional) Enter the keyword password then a text string up to 40 characters long as
the password.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S3100 Series.
9.9(0.0) Introduced on the C9010.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0) Introduced on the S5000.
9.5(0.1) Introduced on the Z9500.
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the S4810, S4820T, Z9000, and MXL.
Smart Scripting CLI 85