Service Manual

script get
Copies a script to a switch.
S4810, S4820T, S3048–ON, S3100 Series, S4048–ON,
S5000, S6000, S6000–ON, Z9100–ON, Z9500, C9010, and
MXL
Syntax
script get url
Parameters
url
Enter the keyword url then the URL location of the script to download to a switch.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S3100 Series.
9.9(0.0) Introduced on the C9010.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0) Introduced on the S5000.
9.5(0.1) Introduced on the Z9500.
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the S4810, S4820T, Z9000, and MXL Switch.
Usage Information
The following formats are supported: Flash, FTP, TFTP, HTTP, and SCP. To retrieve the script les, use the
following formats:
• Flash: Copy from the ash le system (flash://filepath)
• FTP: Copy from the remote le system using FTP (ftp://userid:password@hostip/filepath)
• HTTP: Copy from the remote le system using HTTP (http://hostip/filepath)
• SCP: Copy from the remote le system using SCP (scp://userid:password@hostip/filepath)
• FTP: Copy from the remote le system using FTP (tftp://hostip//filepath)
The downloaded les are stored into a dedicated folder (/usr/pkg/ss-scripts). For S3100 series, the
dedicated folder path is /f10/flash/pkg/ss-scripts.
96 Smart Scripting CLI