Service Manual

NOTE: For stack systems, the script from ss-scripts synchronizes across the stack for every one
hour. When the stack forms rst, the script synchronization from the master to members happens only
after 10 minutes.
script path
Congures the path for the script on the switch.
S4810, S4820T, S3048–ON, S3100 Series, S4048–ON,
S5000, S6000, S6000–ON, Z9100–ON, Z9500, C9010, and
MXL
Syntax
script path path-name
To remove the congured path from the SmartScript environment variable and return to the default script path,
use the no script path command.
Parameters
path-name
Enter the full path of the location of the script. Specify multiple paths using a colon (:).
When initialized, the default path is /usr/pkg/ss-scripts. For S3100 series, the
default path is /f10/flash/pkg/ss-scripts.
Defaults
/usr/pkg/ss-scripts:/usr/pkg/bin:/usr/pkg/sbin:/bin:/sbin:/cr-usr/bin:/cr-usr/
sbin:/f10:/f10/bin:/f10/sbin:/f10/usr/bin:/f10/usr/sbin:/usr/bin:/usr/
sbin:/f10/flash/pkg/ss-scripts:/f10/flash/pkg/usr/pkg/bin:/f10/
flash/pkg/usr/pkg/sbin
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Updated the default script path. Introduced on the S3100 Series.
9.9(0.0) Introduced on the C9010.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0) Introduced on the S5000.
9.5(0.1) Introduced on the Z9500.
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the S4810, S4820T, Z9000, and MXL Switch.
Smart Scripting CLI 97