Service Manual

script trigger-event
Congures the event that causes the script to run.
S4810, S4820T, S3048–ON, S3100 Series, S4048–ON,
S5000, S6000, S6000–ON, Z9100–ON, Z9500, C9010, and
MXL
Syntax
script trigger-event event-name {log-event {tag [tag—or—ex tags | tag-and-ex
tags | tag-regex tag]} [severity severity level]} | time-event {[start {at
date-time | after time}] [stop {at date-time | after time | count number}]
[interval time] [weekday day] [ month month] [monthday nday]} | cpu-usage
percentage | mem-usage percentage}
To delete the trigger event, use the no script trigger-event command.
Parameters
event-name
Enter the name of the script event to trigger.
log-event tag
tag—or—ex
tags
Enter the keywords log-event tag tag—or—ex then the pattern (tag) in the syslog
message to trigger the event if any pattern matches the syslog message. You can enter a
maximum of three tags. Separate each tag by commas.
log-event tag
tag—and—ex
tags
Enter the keywords log-event tag tag-and-ex then the pattern (tag) in the
syslog message to trigger the event if all the patterns match the syslog message. You can
enter a maximum of three tags. Separate each tag by commas.
log-event tag
tag—regex
tags
Enter the keywords log-event tag tag-regex then the regex pattern (tag) in the
syslog message to trigger the event based on the regular expression. You can enter only
one tag.
log-event
severity
severity level
Enter the keywords log-event severity then the severity level to dene a trigger
based on the syslog message severity level. Valid message security levels are from 1 to 6.
time-event
start at date-
time
Enter the keywords time-event start at then the time and date either in HH:MM
— MM/DD/YY format to begin the trigger event at the specied time and date or in
HH:MM format to begin the trigger event at the specied time on the same day (if the
mentioned time is elapsed, the event runs on the next day HH:MM mentioned). The date
can be the present or future date.
time-event
start after
time
Enter the keyword start after then the time in [HHHH:] MMMM format to begin the
trigger event after the specied time.
time-event
stop at date-
time
Enter the keyword stop at then the time and date either in HH:MM — MM/DD/YY
format to stop the trigger event at the specied time and date or in HH:MM format to
begin the trigger event at the specied time on the same day (if the mentioned time is
elapsed, the event runs on the next day HH:MM mentioned). The date must be a future
date.
time-event
stop after
time
Enter the keyword stop after then the time in [HHHH:] MMMM format to stop the
trigger event after the specied time.
Smart Scripting CLI 99