Service Manual

Version Description
9.10(0.0) Introduced on the S3100 Series and S6100–ON.
9.9(0.0) Introduced on the C9010.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0) Introduced on the S5000.
9.5(0.1) Introduced on the Z9500.
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the S4810, S4820T, Z9000, and MXL switch.
Usage Information
When the system reaches any maximum percentage limit, all running scripts suspend and additional scripts are not
scheduled. Scripts begin running when any of the resource limits reaches 10 percent less than the configured
value. Details are entered into syslog.
username (event handler)
Allows you to configure the username to run the scripts.
S4810, S4820T, S3048–ON, S3100 Series, S4048–ON,
S4048T–ON, S5000, S6000, S6000–ON, S6010–ON, S6100–
ON, Z9100–ON, Z9500, C9010, and MXL
Syntax
username username privilege privilege
Parameters
username
username
Enter the keyword username then the name of the user to access the script. The
maximum length is 16 characters. The default username is the user configuring the CLI.
privilege
privilege
Enter the keyword privilege then the privilege level to run the scripts. The range is
from 1 to 15.
Defaults none
Command Modes SCRIPT EVENT HANDLER CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S4048T–ON and S6010–ON.
9.10(0.0) Introduced on the S3100 Series and S6100–ON.
114 Smart Scripting CLI