Service Manual

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.10(0.1) Introduced on the S4048T–ON and S6010–ON.

9.10(0.0) Introduced on the C9010 and S6100–ON. Removed the rest-server option.

9.8(1.0P1) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048–ON.

9.8(0.0P2) Introduced on the S3048–ON.

9.7(0.0) Introduced on the S6000–ON.

9.6(0.0) Introduced on the S Series and Z Series switches.

Usage Information If either certificate or key files are not present or not valid, the prompt displays a message File not found/invalid.

show crypto cert

Displays the installed certificate information or any certificate information that is located in the file-system.

S4810, S4820T, S3048–ON, S4048–ON, S4048T–ON,

S5000, S6000, S6000–ON, S6010–ON, S6100–ON, C9010,

Z9100–ON, and Z9500

Syntax

show crypto cert [file-name]

Command Mode EXEC

Parameters

file-name (Optional) Enter the filename with full path to display the certificate information.

Command Modes EXEC

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.