Administrator Guide

NOTE: For stack systems, the script from ss-scripts synchronizes across
the stack for every one hour. When the stack forms first, the script
synchronization from the master to members happens only after 10 minutes.
script path
Configure the path for the script on the switch.
S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500, and MXL
Syntax
script path path-name
To remove the path for the script, use the no script path command.
Parameters
path-name
Enter the full path of the location of the script. Specify
multiple paths using a colon (:). When initialized, the default
path is /user/pkg/ ss-scripts.
Defaults none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0) Introduced on the S5000.
9.5(0.1) Introduced on the Z9500.
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the S4810, S4820T, Z9000, and MXL Switch.
Usage
Information
The path can contain a network file system (NFS) mounted directory (refer to the
mount nfs CLI command). The path is added to a script search list allowing the
system to search all locations for the script name. If the script is in multiple
locations, the system uses the first instance of the script found.
Related
Commands
mount nfs — sets up the folders in the NFS-mounted directory.
Smart Scripting CLI
105