Administrator Guide

virtualswitc
h-name
Display information on a specified virtual switch by entering
the name the Hypervisor generates.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the S5000.
9.2(0.0) Introduced on the MXL switch.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Usage
Information
To display the interface, virtual-switch name, and Hypervisor-session name for all
current Hypervisor connections on the switch, use the show virtualswitch
command.
To display detailed information about a Hypervisor session, re-enter the command
with the interface and virtual-switch name for the session from the show
virtualswitch output as shown in the following example.
Example
The following command output displays information on the Hypervisor sessions
established on all virtual switches on network servers connected to switch
interfaces.
Dell#show virtualswitch
Interface VSwitch Hypervisor
Gi 0/32 vSwitch3 VMWare_vmware207
Po 7 vSwitch1 VMWare_vmware206
The following command output displays information on the Hypervisor session
established on virtual switch vSwitch3 on a VMware server connected to the
interface 0/32.
Dell#show virtualswitch Gigabitethernet 0/32 vSwitch3
Interface :Gi 0/32
Hypervisor Type :vmware
Hypervisor Name :vmware207
Hypervisor Version :4.1.0
Virtual Switch :vSwitch3
Port groups :
Name :VLAN 3
Vlan Id :138
VIFs:
MAC MTU
00:50:56:92:00:77 8000
Name :VM Network 4
136
Virtual Server Networking CLI