Administrator Guide

Vlan Id :-
VIFs:
MAC MTU
00:0c:29:4f:66:19 8000
PIFs:
MAC MTU
00:26:55:dd:01:4f 8000
NOTE: In the show virtualswitch output, VLAN 1 displays as VLAN ID 1;
VLAN 4095 displays without a VLAN ID as
"-".
show vmmap
Displays the virtual machines accessed on a switch interface.
S4810, S4820T, S5000, and MXL Switch
Syntax
show vmmap interface
Parameters
interface
Display information on the Hypervisor session established on
a specified interface. Enter one of the following interface
types:
• For a 100/1000 Ethernet interface or 1-Gigabit Ethernet
interface, enter GigabitEthernet slot/port.
• For a 10-Gigabit Ethernet interface, enter
TenGigabitEthernet slot/port.
• For a port-channel interface, enter port-channel
number. Valid port-channel numbers are from 1 to 128.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the S5000.
9.2(0.0) Introduced on the MXL switch.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Virtual Server Networking CLI
137