Administrator Guide

Usage
Information
The show vmmap command displays information on the virtual machines accessed
on a switch interface, including the virtual machine name, VMAC address, and
corresponding VLAN ID
Example
Dell#show vmmap gigabitethernet 0/32
VM Name VIF Vlan ID
Redhat_207_03_nfs 00:0c:29:4f:66:19 -
Redhat_207_03_nfs 00:50:56:92:00:77 138
NOTE: In the show vmmap output, VLAN 1 displays as VLAN ID 1; VLAN 4095
displays without a VLAN ID as "- ".
Related
Commands
hypervisor — defines a Hypervisor instance.
type
Set the hypervisor type to which you want to connect.
S4810, S4820T, S5000, and MXL Switch
Syntax
[no] type {vmware | xen-citrix}
Parameters
vmware Set the hypervisor type as VMware.
xen-citrix Set the hypervisor type as Xen-Citrix.
Defaults none
Command
Modes
HYPERVISOR
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the S5000.
9.2(0.0) Introduced on the MXL switch.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Usage
Information
To enable VSN connections with virtual servers, configure a hypervisor type. To
display the currently supported hypervisor types, use the show hypervisor
supported command.
138
Virtual Server Networking CLI