Administrator Guide

vsn enable
Enable VSN on an interface.
S4810, S4820T, S5000, and MXL Switch
Syntax
[no] vsn enable
Defaults VSN is disabled by default on switch interfaces.
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the S5000.
9.2(0.0) Introduced on the MXL switch.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Usage
Information
Enter the vsn enable command only on Hypervisor-facing interfaces. DO NOT
enter this command on an interface used for inter-switch links.
Enter the no vsn enable command to remove the VSN configuration from the
system. To re-enable a Hypervisor session, reconfigure VSN.
Virtual Server Networking CLI
139