Administrator Guide

00:01:25: %STKUNIT0-M:CP %SYS-5-CONFIG_LOAD: Loading

configuration file

Reload with a DHCP Server Offer and no Configuration File

A switch is configured to reload in BMP mode. If the switch reaches a DHCP server but cannot retrieve a

configuration file, the switch looks for a configuration file on the file server if you enabled

config-scr-

download.

1. The system boots up with the BMP application.

2. The system receives a DHCP offer from a DHCP server with the following parameters:

00:02:26: %STKUNIT0-M:CP %BMP-5-BMP_DHCP_OFFER: DHCP OFFER

received on Te 0/21 IS SELECTED.

00:02:26: %STKUNIT0-M:CP %BMP-5-BMP_REQUEST: DHCP REQUEST sent

on Te 0/21.

00:02:26: %STKUNIT0-M:CP %BMP-5-BMP_ACK: DHCP ACK received on

Te 0/21.

00:02:26: %STKUNIT0-M:CP %BMP-5-BMP_BOOT_OFFER: DHCP acquired

IP 13.4.4.44 mask 255.255.255.0 server IP 13.4.4.1.

00:02:26: %STKUNIT0-M:CP %BMP-5-BMP_BOOT_OFFER: DHCP tftp IP

NIL sname NIL dns IP NIL router IP NIL.

00:02:27: %STKUNIT0-M:CP %BMP-5-BMP_BOOT_OFFER: DHCP image file

tftp://13.4.4.1/ftos-img-s4810.

00:02:27: %STKUNIT0-M:CP %BMP-5-BMP_BOOT_OFFER: DHCP config

file NIL.

00:02:27: %STKUNIT0-M:CP %BMP-5-BMP_BOOT_OFFER: stacking info

NIL.

3. The system downloads the build image from the file server.

4. The system compares the current local build image to the downloaded build image as follows:

a. If the build image versions match, the system does not try to load any image and comes up

with the Dell prompt.

00:02:55: %STKUNIT0-M:CP %BMP-5-BMP_RELEASE_HEADER_INFO:

Downloaded Image Major Version : 1

00:02:55: %STKUNIT0-M:CP %BMP-5-BMP_RELEASE_HEADER_INFO:

Downloaded Image Minor Version : 0