Administrator Guide

• show reload-type — displays the current Reload mode (BMP mode or Normal
mode).
config-scr-download
Allows you to specify whether the configuration or script file needs to be downloaded.
S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500, IOA, and MXL
Syntax
config-scr-download { enable | disable }
To reset the download option, use the no config-scr-download { enable |
disable }
command.
Parameters
config-scr-
download
{enable}
Enable downloading a configuration file or preconfiguration
script from the DHCP / file servers.
config-scr-
download
{disable}
Disable downloading a configuration file or preconfiguration
script from the DHCP/ file servers.
Defaults none
Command
Modes
RELOAD-TYPE CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–
ON, Z9000, Z9500, IOA, and MXL.
Usage
Information
For an initial setup, the config-scr-download parameter of the reload-type
command is enabled. After the configuration file successfully downloads, the
config-scr-download parameter is automatically disabled. You can enable it
again using the reload-type command.
Related
Commands
• reload-type — allows you to configure the reload-type options in reload-type
sub command mode.
• show reload-type — displays the current Reload mode (BMP mode or Normal
mode).
Bare Metal Provisioning CLI
45