Administrator Guide

relay

Allows you to configure the addition of option 82 in DHCP client packets.

S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500, IOA, and MXL

Syntax

relay { enable | disable | remote-id { hostname | MAC | Word }}

To reset the options 82 information, use the no relay { enable | disable |

remote-id { hostname | MAC | Word }}

command.

Parameters

enable

Enable the option 82 in BMP. The default value is the MAC

address.

disable

Disable the option 82 in BMP.

remote-id

{ hostname |

MAC | Word }

Enter the keyword remote-id, then the hostname or

chassis MAC address or a text string to set as the remote ID

in option 82. The default is the remote MAC ID for option 82.

Defaults none

Command

Modes

RELOAD-TYPE CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–

ON, Z9000, Z9500, IOA, and MXL.

Commands

• reload-type — allows you to configure the reload-type options in reload-type

sub command mode.

• show reload-type — displays the current Reload mode (BMP mode or Normal

mode).

Bare Metal Provisioning CLI