Administrator Guide

reload-type

Allows you to configure the reload-type options in reload-type sub command mode.

S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500, IOA, and MXL

Syntax

reload-type

Defaults BMP

Command

Modes

CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–

ON, Z9000, Z9500, IOA, and MXL.

9.6(0.0) Introduced on the S5000.

9.5(0.1) Introduced on the Z9500.

9.3(0.0) Introduced on the S6000.

9.2(0.0) Introduced on the MXL Switch. Updated the parameters for

S4810, S4820T, and Z9000.

9.1(0.0) Updated the command mode from EXEC Privilege to

GLOBAL CONFIGURATION. Updated the parameter from

jumpstart to bmp. Added support for the config-scr-

download and user-defined-string commands.

Supported platforms are S4810, S4820T, and Z9000.

9.0.2.0 Introduced on the S6000.

9.0.0.0 Introduced in Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.1.0 Introduced on the S4810.

Commands

• show reload-type — displays the current Reload mode (BMP mode or Normal

mode).

• stop bmp — stops the BMP process and prevents a loop if the DHCP server is

not found.

Bare Metal Provisioning CLI