Administrator Guide

retry-count
Allows you to configure the number of retries for downloading the Dell Networking OS image and
configuration file.
S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500, IOA, and MXL
Syntax
retry-count number
To reset the number of retries, use the no retry-count number
Parameters
retry-count
number
Enter the keyword retry-count, then the number of times
to retry downloading the Dell Networking OS image,
configuration file, or script file from the DHCP / file servers, if
the servers are not reachable. The retry limit is from 0 to 6. If
the retry limit is 0, no retry performs. The default is 0.
Defaults none
Command
Modes
RELOAD-TYPE CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–
ON, Z9000, Z9500, IOA, and MXL.
Related
Commands
• reload-type — allows you to configure the reload-type options in reload-type
sub command mode.
• show reload-type — displays the current Reload mode (BMP mode or Normal
mode).
script post-config
To run the post-configuration script after the preconfiguration script is executed during the BMP reload,
ensure that this command is present in the startup-configuration.
S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500, and MXL
Syntax
script post-config {script-name}
50
Bare Metal Provisioning CLI