Administrator Guide

Version Description

9.2(0.0) Introduced on the Z9000, S4810, S4820T, and MXL switch.

Example

Dell# show boot bmp

Config Download

via DHCP: enabled

BMP State : Waiting for boot options

...

BMP State : Received DHCP offer from DHCP server 25.1.1.1

***** SELECTED OFFER DETAILS ******

Server type= DHCP

Acquired IP= 25.1.1.25

Subnet-mask = 255.255.0.0

Image file = tftp://25.1.1.1/boot_file.bin

config file = tftp://25.1.1.1/config_file.cfg

Server IP = 25.1.1.1

TFTP Server IP = NIL

DNS IP = 25.1.1.1

Routers = NIL

***********************************

...

BMP State : Downloading image boot_file.bin from 25.1.1.1

...

BMP State : Image boot_file.vin successfully downloaded

...

BMP State : BMP process is successfully completed

Commands

reload-type — allows you to configure the reload-type options in reload-type sub

command mode.

show config

Displays the reload type options that are configured on the system.

S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500, IOA, and MXL

Switch

Syntax

show config

Defaults none

Command

Modes

RELOAD-TYPE CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Bare Metal Provisioning CLI