Administrator Guide

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000–ON.

9.6(0.0) Introduced on the S5000.

9.5(0.1) Introduced on the Z9500.

9.3(0.0) Introduced on the S6000.

9.2(0.0) Introduced on the MXL switch. Updated the parameters for

S4810, S4820T, and Z9000.

9.1.0.0 Updated the parameters for S4810 and Z9000.

9.0.2.0 Introduced on the S6000.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.11.4 Introduced on the Z9000.

8.3.10.0 Introduced on the S4810.

Usage

Information

To check the currently configured Auto-Configuration mode (BMP or Normal

reload) on a switch running BMP, use the show reload-type command.

To display the current reload mode for BMP, use the show bootvar or show

system brief

commands. The show bootvar command includes the path of

the Dell Networking OS image file retrieved from a DHCP server when BMP is

running, but not after you exit BMP.

Example

Dell#show reload

reload-type : bmp [Next boot : bmp]

: enable

config-scr-download : enable

dhcp-timeout : 1

vendor-class-identifier : Device 609

retry-count : 3

Dell#

Commands

reload-type — allows you to configure the reload-type options in reload-type sub

command mode.

Bare Metal Provisioning CLI