Concept Guide

Disabling a Hypervisor Session
To stop VSN in a hypervisor session, enter the disable command in HYPERVISOR mode.
The disable command does not remove connectivity with the hypervisor or remove the session information from the system
conguration.
• Shut down VSN in a hypervisor session.
HYPERVISOR mode
disable
Removing a Hypervisor Session
To delete the conguration of a hypervisor session from the running conguration, use the no hypervisor command in
CONFIGURATION mode.
The no hypervisor command deletes the specied conguration and closes an active hypervisor session, but does not remove the
VSN agent from your system.
• Delete a session from the system.
CONFIGURATION mode
no hypervisor name
Enter the name of the hypervisor session that you want to remove.
Uninstalling VSN
Uninstalling the VSN package removes it from the internal ash memory on a switch.
CAUTION
: Before you uninstall the VSN package, rst stop all VSN scripts that are currently running using the no script
script-name command.
• Uninstall the VSN package from the system.
EXEC Privilege mode
package uninstall name
Enter the name of the VSN package exactly as it appears in show packages output.
Viewing VSN Information
To view the conguration of currently active hypervisor sessions, use these commands.
• Display conguration of current hypervisor sessions.
HYPERVISOR mode
show configuration
• Display a list of supported hypervisors.
EXEC Privilege mode
show hypervisor supported
• Display general information on current hypervisor sessions.
EXEC Privilege mode
show virtualswitch [interface] [virtualswitch-name]
126
Virtual Server Networking