Concept Guide
Table Of Contents
- Dell EMC Networking Open Automation Guide 9.14.1.0 November 2018
- About this Guide
- Open Automation Framework
- Bare Metal Provisioning
- Introduction
- How it Works
- Prerequisites
- Industry Standard Upgrades with BMP
- BMP Process Overview
- BMP Operations
- Configure BMP
- BMP Commands and Examples
- System Boot and Set-up Behavior in BMP Mode
- BMP Mode - Boot and Set-up Behavior
- DHCP Offer Vendor-Specific Option for BMP
- DHCP Offer Relay Option 82
- Software Upgrade Using BMP
- Apply Configurations Using BMP Scripts
- Using the Post-configuration Script
- Using Auto-Execution Script - Normal Mode Only
- Timers in Pre–configuration and Post–configuration Scripts
- Script Examples
- BMP Operations on Servers Overview
- File Server Settings
- Domain Name Server Settings
- BMP MIB Support
- Bare Metal Provisioning CLI
- Open Management Infrastructure
- Puppet
- Smart Scripting
- Overview
- Download the Smart Scripting Package
- Dell EMC Environment Variables
- Dell EMC Proprietary Utilities
- Dell EMC SmartScript Utilities
- SQLite
- NET SNMP Client
- Limits on System Usage
- Supported UNIX Utilities
- Creating a Username and Password for Smart Scripting
- Logging in to a NetBSD UNIX Shell
- Downloading Scripts to a Switch
- Network File System (NFS)
- Setting a Search Path for Scripts
- Scheduling and Executing Scripts
- Running a Script from the UNIX Shell
- Running Scripts with User Privileges
- Smart Scripting CLI
- disable
- execute
- mount nfs
- package clear-all
- package install
- package uninstall
- script (run)
- script (stop/resume/clear/kill/unschedule)
- script event-handler
- script execute (EXEC mode)
- script execute
- script get
- script path
- script remove
- script trigger-event
- show packages
- show script
- start shell
- triggered-by
- switch script limit
- username (event handler)
- username
- SNMP MIBs
- Virtual Server Networking
- Virtual Server Networking CLI
- REST API
- HTTP and HTTPS
- XML
- Important Points to Remember
- REST Authentication
- Request Query Parameters
- Sample BGP Configurations
- HTTP Status Error Codes
- REST API — Protocol Data Unit (PDU) Structure
- Configurations
- Operational
- Operational Data for IPv6
- Management Information Base (MIB)
- IETF Interface Operations
- REST API Framework to Execute the CLIs
- Samples of the config-command
- Samples of the EXEC command
- Samples of the show-command
- REST API CLI
- Web Server

| | +--:(source)
| | | +--rw source? dell:mac-address-any
| | | +--rw source-mask dell:mac-address
| | +--:(host)
| | +--rw source-host? dell:mac-address
| +--rw (destination-address)
| | +--:(destination)
| | | +--rw destination? dell:mac-address-any
| | | +--rw destination-mask dell:mac-address
| | +--:(host)
| | +--rw destination-host? dell:mac-address
| +--rw encapsulation-type? dell:mac-acl-encap-types
| +--rw encapsulation-operator? dell:mac-acl-encap-operators
| +--rw encapsulation-protocol? uint32
+--rw acl-filters-qos
+--rw filter-type? dell:acl-rule-types
+--rw protocol dell:mac-protocols-qos
Management Route
The following denition congures and displays the properties of a Management Route.
Module: MANAGEMENT-ROUTE
URI:
/api/running/dell/management/route
Methods Supported: GET, POST, PUT, PATCH, and DELETE
Management Route Conguration Model
+--rw management
+--rw route* [ip-address-prefix]
+--rw ip-address-prefix union
+--rw (exit-value)?
+--:(exit-interface)
| +--rw exit-interface? dell:mgmt-route-intf-types
+--:(next-hop)
+--rw next-hop? inet:ip-address
Policy Based Routing (PBR)
Use the following denition to congure and display the properties of PBR:
Module:
PBR
URI:
/api/running/dell/redirect-list
Methods Supported: GET, POST, PUT, PATCH, and DELETE
PBR Conguration Model
+--rw dell
+--rw system
+--rw interfaces
+--rw router
+--rw management
+--rw ip
| +--rw redirect-list [name]
| +--rw name string
162
REST API