Concept Guide
Table Of Contents
- Dell EMC Networking Open Automation Guide 9.14.1.0 November 2018
- About this Guide
- Open Automation Framework
- Bare Metal Provisioning
- Introduction
- How it Works
- Prerequisites
- Industry Standard Upgrades with BMP
- BMP Process Overview
- BMP Operations
- Configure BMP
- BMP Commands and Examples
- System Boot and Set-up Behavior in BMP Mode
- BMP Mode - Boot and Set-up Behavior
- DHCP Offer Vendor-Specific Option for BMP
- DHCP Offer Relay Option 82
- Software Upgrade Using BMP
- Apply Configurations Using BMP Scripts
- Using the Post-configuration Script
- Using Auto-Execution Script - Normal Mode Only
- Timers in Pre–configuration and Post–configuration Scripts
- Script Examples
- BMP Operations on Servers Overview
- File Server Settings
- Domain Name Server Settings
- BMP MIB Support
- Bare Metal Provisioning CLI
- Open Management Infrastructure
- Puppet
- Smart Scripting
- Overview
- Download the Smart Scripting Package
- Dell EMC Environment Variables
- Dell EMC Proprietary Utilities
- Dell EMC SmartScript Utilities
- SQLite
- NET SNMP Client
- Limits on System Usage
- Supported UNIX Utilities
- Creating a Username and Password for Smart Scripting
- Logging in to a NetBSD UNIX Shell
- Downloading Scripts to a Switch
- Network File System (NFS)
- Setting a Search Path for Scripts
- Scheduling and Executing Scripts
- Running a Script from the UNIX Shell
- Running Scripts with User Privileges
- Smart Scripting CLI
- disable
- execute
- mount nfs
- package clear-all
- package install
- package uninstall
- script (run)
- script (stop/resume/clear/kill/unschedule)
- script event-handler
- script execute (EXEC mode)
- script execute
- script get
- script path
- script remove
- script trigger-event
- show packages
- show script
- start shell
- triggered-by
- switch script limit
- username (event handler)
- username
- SNMP MIBs
- Virtual Server Networking
- Virtual Server Networking CLI
- REST API
- HTTP and HTTPS
- XML
- Important Points to Remember
- REST Authentication
- Request Query Parameters
- Sample BGP Configurations
- HTTP Status Error Codes
- REST API — Protocol Data Unit (PDU) Structure
- Configurations
- Operational
- Operational Data for IPv6
- Management Information Base (MIB)
- IETF Interface Operations
- REST API Framework to Execute the CLIs
- Samples of the config-command
- Samples of the EXEC command
- Samples of the show-command
- REST API CLI
- Web Server

| +--ro min-time-b4-advt-start? uint32
| +--ro conn-established? uint32
| +--ro conn-dropped? uint32
| +--ro last-connstr? string
| +--ro last-reset? hour-minute-second
| +--ro last-reset-never? boolean
| +--ro notification-history? string
| +--ro addr-type-receive-nbr? string
| +--ro recv-multi-proto-ext? string
| +--ro recv-route-refresh? string
| +--ro recv-graceful-restart? string
| +--ro recv-cisco-route-refresh? string
| +--ro recv-four-byte-octet-as? string
| +--ro recv-add-path? string
| +--ro addr-type-adv-nbr? string
| +--ro adv-multi-proto-ext? string
| +--ro adv-route-refresh? string
| +--ro adv-graceful-restart? string
| +--ro adv-cisco-route-refresh? string
| +--ro adv-four-byte-octet-as? string
| +--ro adv-add-path? string
| +--ro member-of-peer-grp? string
| +--ro peer-admin-status? enumeration
| +--ro peer-fall-over? enumeration
| +--ro bfd-enable-mode? enumeration
| +--ro update-sourceset? string
| +--ro peer-allow-aslimit? uint32
| +--ro peer-act-in-grp-out-bound-opt? string
| +--ro max-prefix-set? uint32
| +--ro with-threshold? uint32
| +--ro config-drop-warn? enumeration
| +--ro ttl? uint32
| +--ro ebgp-multi-hop-enable? boolean
| +--ro next-hop-set-self? string
| +--ro localpref? uint32
| +--ro num-stale-paths-left? uint32
| +--ro remote-as? string
| +--ro local-as? string
| +--ro noprepend? uint32
| +--ro local-as-prepend? uint32
| +--ro neighbor-under-common-admin? string
| +--ro version? uint32
| +--ro description? string
| +--ro address-family? string
| +--ro local-added-list? uint32
| +--ro local-replaced-list? uint32
| +--ro local-removed-list? uint32
| +--ro inq-added-list? uint32
| +--ro inq-replaced-list? uint32
| +--ro inq-removed-list? uint32
| +--ro outq-added-list? uint32
| +--ro outq-removed-list? uint32
| +--ro accept-prefix? uint32
| +--ro advertised-prefix? uint32
| +--ro prefix-denied? uint32
| +--ro addr-withdrawn-from-peer? uint32
| +--ro addr-withdrawn-by-peer? uint32
| +--ro martian-addr-ignored? boolean
| +--ro restart-time-adver-peer? uint32
| +--ro restart-time-rece-peer? uint32
| +--ro stale-path-time-config-peer? uint32
| +--ro graceful-restart-role-recv-only? string
| +--ro graceful-restart-role-adver-only? string
| +--ro restart-time-adv? uint32
| +--ro restart-time-rcv? uint32
| +--ro route-reflector-client? string
| +--ro soft-reconfig-inbound? boolean
| +--ro session-md5-auth? string
| +--ro default-org-routemap? string
168
REST API