Concept Guide
Table Of Contents
- Dell EMC Networking Open Automation Guide 9.14.1.0 November 2018
- About this Guide
- Open Automation Framework
- Bare Metal Provisioning
- Introduction
- How it Works
- Prerequisites
- Industry Standard Upgrades with BMP
- BMP Process Overview
- BMP Operations
- Configure BMP
- BMP Commands and Examples
- System Boot and Set-up Behavior in BMP Mode
- BMP Mode - Boot and Set-up Behavior
- DHCP Offer Vendor-Specific Option for BMP
- DHCP Offer Relay Option 82
- Software Upgrade Using BMP
- Apply Configurations Using BMP Scripts
- Using the Post-configuration Script
- Using Auto-Execution Script - Normal Mode Only
- Timers in Pre–configuration and Post–configuration Scripts
- Script Examples
- BMP Operations on Servers Overview
- File Server Settings
- Domain Name Server Settings
- BMP MIB Support
- Bare Metal Provisioning CLI
- Open Management Infrastructure
- Puppet
- Smart Scripting
- Overview
- Download the Smart Scripting Package
- Dell EMC Environment Variables
- Dell EMC Proprietary Utilities
- Dell EMC SmartScript Utilities
- SQLite
- NET SNMP Client
- Limits on System Usage
- Supported UNIX Utilities
- Creating a Username and Password for Smart Scripting
- Logging in to a NetBSD UNIX Shell
- Downloading Scripts to a Switch
- Network File System (NFS)
- Setting a Search Path for Scripts
- Scheduling and Executing Scripts
- Running a Script from the UNIX Shell
- Running Scripts with User Privileges
- Smart Scripting CLI
- disable
- execute
- mount nfs
- package clear-all
- package install
- package uninstall
- script (run)
- script (stop/resume/clear/kill/unschedule)
- script event-handler
- script execute (EXEC mode)
- script execute
- script get
- script path
- script remove
- script trigger-event
- show packages
- show script
- start shell
- triggered-by
- switch script limit
- username (event handler)
- username
- SNMP MIBs
- Virtual Server Networking
- Virtual Server Networking CLI
- REST API
- HTTP and HTTPS
- XML
- Important Points to Remember
- REST Authentication
- Request Query Parameters
- Sample BGP Configurations
- HTTP Status Error Codes
- REST API — Protocol Data Unit (PDU) Structure
- Configurations
- Operational
- Operational Data for IPv6
- Management Information Base (MIB)
- IETF Interface Operations
- REST API Framework to Execute the CLIs
- Samples of the config-command
- Samples of the EXEC command
- Samples of the show-command
- REST API CLI
- Web Server

+--ro hop-limit? uint32
+--ro keep-alive? boolean
+--ro ka-destination-address? dell:ip-address
+--ro ka-interval? uint32
+--ro ka-attempts-type? keep-alive-attempt-types
+--ro ka-attempts? uint32
+--ro ka-state? keep-alive-states
+--ro ka-state-last-modified? string
+--ro allow-remote-enabled? boolean
+--ro allow-remote* [remote-address remote-prefix-len]
| +--ro remote-address dell:ip-address
| +--ro remote-prefix-len dell:ip-address-prefix-length
+--ro lag-name? lag-intf-name
+--ro current-intf-address? string
+--ro ipv4-address? string
+--ro ipv4-address-mode? enumeration
+--ro dhcp-client? string
+--ro link-local-ipv6-address? dell:ipv6-address-with-prefix
+--ro global-ipv6-address* [address]
| +--ro address dell:ipv6-address-with-prefix
+--ro secondary-ip-address* [address]
| +--ro address dell:ipv4-address-with-prefix
+--ro line-speed? enumeration
+--ro ip-mtu? uint32
+--ro arp-type? enumeration
+--ro arp-timeout? uint32
+--ro last-clear-intf-cnters? uint32
+--ro last-intf-status-changed? uint32
+--ro in-octets? yang:counter64
+--ro in-unicast-pkts? yang:counter64
+--ro in-multicast-pkts? yang:counter64
+--ro in-broadcast-pkts? yang:counter64
+--ro in-64bytes-pkts? yang:counter64
+--ro in-over-64bytes-pkts? yang:counter64
+--ro in-over-127bytes-pkts? yang:counter64
+--ro in-over-255bytes-pkts? yang:counter64
+--ro in-over-511bytes-pkts? yang:counter64
+--ro in-over-1023bytes-pkts? yang:counter64
+--ro in-symbol-errors? yang:counter64
+--ro in-runts? yang:counter64
+--ro in-giants? yang:counter64
+--ro in-throttles? yang:counter64
+--ro in-crc? yang:counter64
+--ro in-over-run? yang:counter64
+--ro in-discards? yang:counter64
+--ro in-unknown-protocol? yang:counter64
+--ro out-octets? yang:counter64
+--ro out-unicast-pkts? yang:counter64
+--ro out-multicast-pkts? yang:counter64
+--ro out-broadcast-pkts? yang:counter64
+--ro out-64bytes-pkts? yang:counter64
+--ro out-over-64bytes-pkts? yang:counter64
+--ro out-over-127bytes-pkts? yang:counter64
+--ro out-over-255bytes-pkts? yang:counter64
+--ro out-over-511bytes-pkts? yang:counter64
+--ro out-over-1023bytes-pkts? yang:counter64
+--ro out-under-runs? yang:counter64
+--ro out-throttles? yang:counter64
+--ro out-collisions? yang:counter64
+--ro out-wred-drops? yang:counter64
+--ro out-discards? yang:counter64
+--ro out-symbol-errors? yang:counter64
+--ro rate-interval? yang:counter32
+--ro in-pkts-in-mbps? yang:counter32
+--ro in-pkts-in-pkts-per-sec? yang:counter32
+--ro in-cent-line-rate? yang:counter32
+--ro out-pkts-in-mbps? yang:counter32
+--ro out-pkts-in-pkts-per-sec? yang:counter32
+--ro out-cent-line-rate? yang:counter32
REST API
173