Concept Guide
Table Of Contents
- Dell EMC Networking Open Automation Guide 9.14.1.0 November 2018
- About this Guide
- Open Automation Framework
- Bare Metal Provisioning
- Introduction
- How it Works
- Prerequisites
- Industry Standard Upgrades with BMP
- BMP Process Overview
- BMP Operations
- Configure BMP
- BMP Commands and Examples
- System Boot and Set-up Behavior in BMP Mode
- BMP Mode - Boot and Set-up Behavior
- DHCP Offer Vendor-Specific Option for BMP
- DHCP Offer Relay Option 82
- Software Upgrade Using BMP
- Apply Configurations Using BMP Scripts
- Using the Post-configuration Script
- Using Auto-Execution Script - Normal Mode Only
- Timers in Pre–configuration and Post–configuration Scripts
- Script Examples
- BMP Operations on Servers Overview
- File Server Settings
- Domain Name Server Settings
- BMP MIB Support
- Bare Metal Provisioning CLI
- Open Management Infrastructure
- Puppet
- Smart Scripting
- Overview
- Download the Smart Scripting Package
- Dell EMC Environment Variables
- Dell EMC Proprietary Utilities
- Dell EMC SmartScript Utilities
- SQLite
- NET SNMP Client
- Limits on System Usage
- Supported UNIX Utilities
- Creating a Username and Password for Smart Scripting
- Logging in to a NetBSD UNIX Shell
- Downloading Scripts to a Switch
- Network File System (NFS)
- Setting a Search Path for Scripts
- Scheduling and Executing Scripts
- Running a Script from the UNIX Shell
- Running Scripts with User Privileges
- Smart Scripting CLI
- disable
- execute
- mount nfs
- package clear-all
- package install
- package uninstall
- script (run)
- script (stop/resume/clear/kill/unschedule)
- script event-handler
- script execute (EXEC mode)
- script execute
- script get
- script path
- script remove
- script trigger-event
- show packages
- show script
- start shell
- triggered-by
- switch script limit
- username (event handler)
- username
- SNMP MIBs
- Virtual Server Networking
- Virtual Server Networking CLI
- REST API
- HTTP and HTTPS
- XML
- Important Points to Remember
- REST Authentication
- Request Query Parameters
- Sample BGP Configurations
- HTTP Status Error Codes
- REST API — Protocol Data Unit (PDU) Structure
- Configurations
- Operational
- Operational Data for IPv6
- Management Information Base (MIB)
- IETF Interface Operations
- REST API Framework to Execute the CLIs
- Samples of the config-command
- Samples of the EXEC command
- Samples of the show-command
- REST API CLI
- Web Server
IPv6 ACL
Use the following denition to get the IPv6 ACL operational data.
Module: IPv6
URI:
/api/operational/dell/stats/access-list/ipv6
Methods Supported: GET
IPv6 ACL Operational Model
+--ro dell
+--ro stats
+--ro access-list
+--ro ipv6 [name]
+--ro name dell:access-list-name
+--ro ipv6-acl-filter [seq-num]
+--ro seq-num uint32
+--ro filter-type? acl-rule-types
+--ro protocol? ip-protocols
+--ro ipv6-protocol-number? uint32
+--ro source
| +--ro ipv6-filter? acl-incoming-address-filter-types
| +--ro ipv6-address? dell:ipv6-address
| +--ro ipv6-mask? dell:ipv6-address
| +--ro operator? ip-acl-operators
| +--ro port? uint32
| +--ro port-range? layer4-port-range
+--ro destination
| +--ro ipv6-filter? acl-incoming-address-filter-types
| +--ro ipv6-address? dell:ipv6-address
| +--ro ipv6-mask? dell:ipv6-address
| +--ro operator? ip-acl-operators
| +--ro port? uint32
| +--ro port-range? layer4-port-range
+--ro count-type? acl-rule-count-types
+--ro count-value? uint32
+--ro log? boolean
+--ro monitor? boolean
+--ro drop-configured? boolean
+--ro icmp-type? string
+--ro icmp-code? uint32
+--ro log-threshold? uint32
+--ro log-interval? uint32
+--ro ack? boolean
+--ro fin? boolean
+--ro psh? boolean
+--ro rst? boolean
+--ro syn? boolean
+--ro urg? boolean
Management Route
Use the following denition to get the Management Route statistic.
Module:
MANAGEMENT-ROUTE
URI:
/api/operational/dell/stats/ip/management-route
176 REST API