Concept Guide
Table Of Contents
- Dell EMC Networking Open Automation Guide 9.14.1.0 November 2018
- About this Guide
- Open Automation Framework
- Bare Metal Provisioning
- Introduction
- How it Works
- Prerequisites
- Industry Standard Upgrades with BMP
- BMP Process Overview
- BMP Operations
- Configure BMP
- BMP Commands and Examples
- System Boot and Set-up Behavior in BMP Mode
- BMP Mode - Boot and Set-up Behavior
- DHCP Offer Vendor-Specific Option for BMP
- DHCP Offer Relay Option 82
- Software Upgrade Using BMP
- Apply Configurations Using BMP Scripts
- Using the Post-configuration Script
- Using Auto-Execution Script - Normal Mode Only
- Timers in Pre–configuration and Post–configuration Scripts
- Script Examples
- BMP Operations on Servers Overview
- File Server Settings
- Domain Name Server Settings
- BMP MIB Support
- Bare Metal Provisioning CLI
- Open Management Infrastructure
- Puppet
- Smart Scripting
- Overview
- Download the Smart Scripting Package
- Dell EMC Environment Variables
- Dell EMC Proprietary Utilities
- Dell EMC SmartScript Utilities
- SQLite
- NET SNMP Client
- Limits on System Usage
- Supported UNIX Utilities
- Creating a Username and Password for Smart Scripting
- Logging in to a NetBSD UNIX Shell
- Downloading Scripts to a Switch
- Network File System (NFS)
- Setting a Search Path for Scripts
- Scheduling and Executing Scripts
- Running a Script from the UNIX Shell
- Running Scripts with User Privileges
- Smart Scripting CLI
- disable
- execute
- mount nfs
- package clear-all
- package install
- package uninstall
- script (run)
- script (stop/resume/clear/kill/unschedule)
- script event-handler
- script execute (EXEC mode)
- script execute
- script get
- script path
- script remove
- script trigger-event
- show packages
- show script
- start shell
- triggered-by
- switch script limit
- username (event handler)
- username
- SNMP MIBs
- Virtual Server Networking
- Virtual Server Networking CLI
- REST API
- HTTP and HTTPS
- XML
- Important Points to Remember
- REST Authentication
- Request Query Parameters
- Sample BGP Configurations
- HTTP Status Error Codes
- REST API — Protocol Data Unit (PDU) Structure
- Configurations
- Operational
- Operational Data for IPv6
- Management Information Base (MIB)
- IETF Interface Operations
- REST API Framework to Execute the CLIs
- Samples of the config-command
- Samples of the EXEC command
- Samples of the show-command
- REST API CLI
- Web Server

+--ro reports-received? yang:counter32
+--ro reports-sent? yang:counter32
+--ro leaves-sent? yang:counter32
+--ro mldv2-queries-received? yang:counter32
| +--ro mldv1-queries-received? yang:counter32
| +--ro errors-malformed-pkts? yang:counter32
+--ro neighbors* [ipv6-address]
| +--ro ipv6-address dell:ipv6-address-with-prefix
| +--ro intf-type? string
| +--ro age-expires-in-mins? dell:hour-minute
| +--ro vlan? dell:vlan-id-num
+--ro state? enumeration
| +--ro cpu? enumeration
| +--ro hardware-address? string
+--ro error-stats
| +--ro errs-total? yang:counter32
| +--ro errs-not-sent? yang:counter32
+--ro errs-no-route? yang:counter32
| +--ro errs-admin-prohib? yang:counter32
| +--ro errs-beyond-scope? yang:counter32
| +--ro errs-addr-unreach? yang:counter32
| +--ro errs-port-unreach? yang:counter32
| +--ro errs-pkt-too-big? yang:counter32
| +--ro errs-time-ex-trans? yang:counter32
| +--ro errs-time-ex-frags? yang:counter32
| +--ro errs-hdr-field? yang:counter32
| +--ro errs-unrec-nxt-hdr? yang:counter32
| +--ro errs-unrec-opt? yang:counter32
| +--ro errs-redirect? yang:counter32
| +--ro errs-unknown? yang:counter32
Management Route
Use the following denition to get the statistics of IPv6 Management Route.
Module:
MANAGEMENT-ROUTE
URI:
/api/running/dell/stats/ipv6/management-route
Methods Supported: GET
IPv6 Management Route Model
+--ro ipv6
+--ro management-route
+--ro route-entry* [destination]
| +--ro destination dell:ipv6-address-with-prefix
| +--ro gateway? string
| +--ro state? enumeration
| +--ro default-route? boolean
+--ro summary
+--ro connected-active? uint32
+--ro connected-inactive? uint32
+--ro static-active? uint32
+--ro static-inactive? uint32
+--ro route-size-active? uint32
+--ro route-size-inactive? uint32
+--ro total-active-routes? uint32
+--ro total-inactive-routes? uint32
REST API
185