Concept Guide
Table Of Contents
- Dell EMC Networking Open Automation Guide 9.14.1.0 November 2018
- About this Guide
- Open Automation Framework
- Bare Metal Provisioning
- Introduction
- How it Works
- Prerequisites
- Industry Standard Upgrades with BMP
- BMP Process Overview
- BMP Operations
- Configure BMP
- BMP Commands and Examples
- System Boot and Set-up Behavior in BMP Mode
- BMP Mode - Boot and Set-up Behavior
- DHCP Offer Vendor-Specific Option for BMP
- DHCP Offer Relay Option 82
- Software Upgrade Using BMP
- Apply Configurations Using BMP Scripts
- Using the Post-configuration Script
- Using Auto-Execution Script - Normal Mode Only
- Timers in Pre–configuration and Post–configuration Scripts
- Script Examples
- BMP Operations on Servers Overview
- File Server Settings
- Domain Name Server Settings
- BMP MIB Support
- Bare Metal Provisioning CLI
- Open Management Infrastructure
- Puppet
- Smart Scripting
- Overview
- Download the Smart Scripting Package
- Dell EMC Environment Variables
- Dell EMC Proprietary Utilities
- Dell EMC SmartScript Utilities
- SQLite
- NET SNMP Client
- Limits on System Usage
- Supported UNIX Utilities
- Creating a Username and Password for Smart Scripting
- Logging in to a NetBSD UNIX Shell
- Downloading Scripts to a Switch
- Network File System (NFS)
- Setting a Search Path for Scripts
- Scheduling and Executing Scripts
- Running a Script from the UNIX Shell
- Running Scripts with User Privileges
- Smart Scripting CLI
- disable
- execute
- mount nfs
- package clear-all
- package install
- package uninstall
- script (run)
- script (stop/resume/clear/kill/unschedule)
- script event-handler
- script execute (EXEC mode)
- script execute
- script get
- script path
- script remove
- script trigger-event
- show packages
- show script
- start shell
- triggered-by
- switch script limit
- username (event handler)
- username
- SNMP MIBs
- Virtual Server Networking
- Virtual Server Networking CLI
- REST API
- HTTP and HTTPS
- XML
- Important Points to Remember
- REST Authentication
- Request Query Parameters
- Sample BGP Configurations
- HTTP Status Error Codes
- REST API — Protocol Data Unit (PDU) Structure
- Configurations
- Operational
- Operational Data for IPv6
- Management Information Base (MIB)
- IETF Interface Operations
- REST API Framework to Execute the CLIs
- Samples of the config-command
- Samples of the EXEC command
- Samples of the show-command
- REST API CLI
- Web Server
| +--ro txPktUnit3? int32
+--ro fp-cpu-party-bus-stats-table* [stackUnitId]
| +--ro stackUnitId int32
| +--ro inputPackets? int32
| +--ro inputBytes? int32
| +--ro inputDropped? int32
| +--ro inputError? int32
| +--ro outputPackets? int32
| +--ro outputBytes? int32
| +--ro outputError? int32
+--ro fp-drops-table* [stackUnitId stackPortId]
| +--ro stackUnitId int32
| +--ro stackPortId int32
| +--ro inDrops? yang:counter64
| +--ro inIBPCBPFullDrops? yang:counter64
| +--ro inPortSTPnotFwdDrops? yang:counter64
| +--ro inIPv4L3Discards? yang:counter64
| +--ro inPolicyDiscards? yang:counter64
| +--ro inPktDroppedByFP? yang:counter64
| +--ro inL2L3Drops? yang:counter64
| +--ro inPortBitMapZeroDrops? yang:counter64
| +--ro inRxVLANDrops? yang:counter64
| +--ro inFCSDrops? yang:counter64
| +--ro inMTUExceeds? yang:counter64
| +--ro mmuHoldDrops? yang:counter64
| +--ro mmuTxPurgeCellErr? yang:counter64
| +--ro mmuAgedDrops? yang:counter64
| +--ro egressFCSDrops? yang:counter64
| +--ro egIPv4L3UCAgedDrops? yang:counter64
| +--ro egTTLThresholdDrops? yang:counter64
| +--ro egInvalidVLANCounterDrops? yang:counter64
| +--ro egL2MCDrops? yang:counter64
| +--ro egPktDropsOfAnyCondition? yang:counter64
| +--ro egHgMacUnderFlow? yang:counter64
| +--ro egTxErrPktCounter? yang:counter64
+--ro fp-packet-buffer-table* [stackUnitId portPipe]
| +--ro stackUnitId int32
| +--ro portPipe int32
| +--ro totalPktBuffer? int32
| +--ro currentAvailableBuffer? int32
| +--ro packetBufferAlloc? int32
+--ro fp-port-stats-table* [stackUnitId stackPortId]
| +--ro stackUnitId int32
| +--ro stackPortId int32
| +--ro currentUsagePerPort? int32
| +--ro defaultPktBufferAlloc? int32
| +--ro maxLimitPerPort? int32
+--ro fp-cos-stats-table* [stackUnitId stackPortId stackPortCOSId]
+--ro stackUnitId int32
+--ro stackPortId int32
+--ro stackPortCOSId int32
+--ro currentUsagePerCOS? int32
+--ro defaultPktBufferAlloc? int32
+--ro maxLimitPerCOS? int32
IF MIB Operations
The following denition displays the properties of Interfaces using the IF-MIB:
Module:
IF-MIB
URI:
/api/operational/mib/if-mib
Methods Supported: GET
192 REST API