Service Manual

script get
Copy a script to a switch.
S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON, Z9500,
C9010, and MXL
Syntax
script get url
Parameters
url
Enter the keyword url then the URL location of the script
to download to a switch.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0) Introduced on the S5000.
9.5(0.1) Introduced on the Z9500.
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the S4810, S4820T, Z9000, and MXL Switch.
Usage Information
The following formats are supported: Flash, FTP, TFTP, HTTP, and SCP. To retrieve
the script files, use the following formats:
• Flash: Copy from the flash file system (flash://filepath)
• FTP: Copy from the remote file system using FTP (ftp://
userid:password@hostip/filepath)
• HTTP: Copy from the remote file system using HTTP (http://hostip/
filepath)
• SCP: Copy from the remote file system using SCP (scp://
userid:password@hostip/filepath
)
• FTP: Copy from the remote file system using FTP (tftp://hostip//
filepath
)
The downloaded files are stored into a dedicated folder (/usr/pkg/ss-scripts).
104
Smart Scripting CLI