Service Manual

Parameters
interface
Display information on the Hypervisor session established
on a specified interface. Enter one of the following interface
types:
• For a 100/1000 Ethernet interface or 1-Gigabit Ethernet
interface, enter GigabitEthernet slot/port.
• For a 10-Gigabit Ethernet interface, enter
TenGigabitEthernet slot/port.
• For a port-channel interface, enter port-channel
number. Valid port-channel numbers are from 1 to 128.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the S5000.
9.2(0.0) Introduced on the MXL switch.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Usage Information
The show vmmap command displays information on the virtual machines accessed
on a switch interface, including the virtual machine name, VMAC address, and
corresponding VLAN ID
Example
Dell#show vmmap gigabitethernet 0/32
VM Name VIF Vlan ID
Redhat_207_03_nfs 00:0c:29:4f:66:19 -
Redhat_207_03_nfs 00:50:56:92:00:77 138
NOTE: In the show vmmap output, VLAN 1 displays as VLAN ID 1; VLAN 4095
displays without a VLAN ID as
"- ".
Related
Commands
hypervisor — defines a Hypervisor instance.
Virtual Server Networking CLI
137