Service Manual

type
Set the hypervisor type to which you want to connect.
S4810, S4820T, S5000, and MXL Switch
Syntax
[no] type {vmware | xen-citrix}
Parameters
vmware Set the hypervisor type as VMware.
xen-citrix Set the hypervisor type as Xen-Citrix.
Defaults none
Command Modes HYPERVISOR
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the S5000.
9.2(0.0) Introduced on the MXL switch.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Usage Information
To enable VSN connections with virtual servers, configure a hypervisor type. To
display the currently supported hypervisor types, use the show hypervisor
supported command.
vsn enable
Enable VSN on an interface.
S4810, S4820T, S5000, and MXL Switch
Syntax
[no] vsn enable
Defaults VSN is disabled by default on switch interfaces.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
138
Virtual Server Networking CLI