Service Manual

Version Description
9.6(0.0) Introduced on the S5000.
9.2(0.0) Introduced on the MXL switch.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Usage Information
Enter the vsn enable command only on Hypervisor-facing interfaces. DO NOT
enter this command on an interface used for inter-switch links.
Enter the no vsn enable command to remove the VSN configuration from the
system. To re-enable a Hypervisor session, reconfigure VSN.
Virtual Server Networking CLI
139