Service Manual

REST API CLI

The REST API CLI commands are supported on the S4810, S4820T, S3048–ON, S4048–ON, S5000,

S6000, S6000–ON, and Z9500 platforms.

rest-server

Enable the REST API service over a non-secure or secure HTTP.

S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON, and

Z9500

Syntax

rest-server {http | secure-http}

To disable the REST API over a non-secure or secure HTTP request, use the no

rest-server {http | secure-http} command.

Parameters

http

Enable the REST API on HTTP (Port: 8008).

secure-http

Enable the REST API on HTTPS (Port: 8888).

Defaults REST API is disabled by default.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0P5) Introduced on the S4048–ON.

9.8(0.0P2) Introduced on the S3048–ON.

9.7(0.0) Introduced on the S6000–ON.

9.6(0.0) Introduced on the S5000.

9.5(0.1) Introduced on the Z9500.

9.4(0.0P1) Introduced on the S4810, S4820T, S6000, and Z9000.

200

REST API CLI