Service Manual

show config

Displays the reload type options that are configured on the system.

S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON, Z9500,

C9010, IOA, and MXL Switch

Syntax

show config

Defaults none

Command Modes RELOAD-TYPE CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.8(0.0P5) Introduced on the S4048–ON.

9.8(0.0P2) Introduced on the S3048–ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–

ON, Z9000, Z9500, IOA, and MXL.

Example

Dell(conf-reload-type)#show config

reload-type

auto-save enable

boot-type bmp-reload

config-scr-download enable

dhcp-timeout 12

retry-count 3

vendor-class-identifier Sample

relay enable

relay remote-id TEST

Dell(conf-reload-type)#

Commands

• reload-type — allows you to configure the reload-type options in reload-type

sub command mode.

• auto-save — allows you to configure the auto save option for the downloaded

configuration or script file which are not saved by default.

• boot-type — allows you to configure the reload type.

• config-scr-download — allows you to specify whether the configuration or

script file needs to be downloaded.

• dhcp-timeout — allows you to configure the DHCP timeout limit.

• relay — allows you to configure the addition of option 82 in DHCP client

packets.

Bare Metal Provisioning CLI