Setup Guide

Parameters
username
username
Enter the keyword username then the name of the user to access the script. The
maximum length is 16 characters. The default username is the user conguring the CLI.
privilege
privilege
Enter the keyword privilege then the privilege level to run the scripts. The range is
from 1 to 15.
Defaults none
Command Modes SCRIPT EVENT HANDLER CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S4048T–ON and S6010–ON.
9.10(0.0) Introduced on the S3100 Series and S6100–ON.
9.9(0.0) Introduced on the C9010.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500, and MXL.
Usage Information
• Only the person who congures the scheduled scripts (or a higher privileged user) can change them.
• If you do not provide the username, the system uses current session username. If the script is triggered from
the console, the system uses the Dell EMC Networking OS default username (smartuser).
• The privilege level mentioned should be equal to or less than the user who is conguring the command.
Example
username smartuser privilege 15
Smartuser is the default username used for running the scripts on the device, which takes the privilege based on
the user session.
username
Congures an additional username and password to run the scripts on a switch. Use the username and password to log in to a UNIX shell
and apply the read-write privileges assigned to the username when a script runs.
S4810, S4820T, S3048–ON, S3100 Series, S4048–ON,
S4048T–ON, S5000, S6000, S6000–ON, S6010–ON, S6100–
ON, Z9100–ON, Z9500, C9010, and MXL
Syntax
username name password password
To remove the username and password, use the no username command.
Smart Scripting CLI 113